EasyManuals Logo

H3C S5560-EI series User Manual

H3C S5560-EI series
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
78
SFP port
The S5560-30F-EI switch provides 24 fixed SFP ports. The S5560-34C-EI switch provides eight fixed SFP
ports. You can install the FE SFP modules in Table 22 and GE SFP
transceiver modules and cables
in Table 23 in
the SFP ports.
Table 22 FE SFP transceiver modules available for the SFP ports
FE SFP module
Central
wavelength
(nm)
Connector
Fiber diameter (μm)
Max transmission
distance
SFP-FE-SX-MM1310-A 1310 LC
Multi-mode, 50/125
2 km (1.24 miles)
Multi-mode,
62.5/125
SFP-FE-LX-SM1310-A 1310 LC Single-mode, 9/125 15 km (9.32 miles)
SFP-FE-LH40-SM1310 1310 LC Single-mode, 9/125 40 km (24.86 miles)
SFP-FE-LX-SM1310-BIDI
TX: 1310
RX: 1550
LC Single-mode, 9/125 15 km (9.32 miles)
SFP-FE-LX-SM1550-BIDI
TX: 1550
RX: 1310
IMPORTANT:
The SFP-FE-LX-SM1310-BIDI and SFP-FE-LX-SM1550-BIDI modules must be used in pairs.
To install multiple SFP-GE-LH100-SM1550 transceiver modules on the S5560-30F-EI and S5560-34C-EI
switches, separate these transceiver modules by other types of transceiver modules. For example, you
can install the SFP-GE-LH100-SM1550 transceiver modules in ports 1 and 2, other transceiver modules
in ports 3 and 4, and the SFP-GE-LH100-SM1550 transceiver modules in ports 5 and 6.
NOTE:
As a best practice, use only H3C SFP transceiver modules and cables for the SFP ports.
The H3C SFP transceiver modules and cables available for the SFP ports are subject to chan
g
e over time.
For the most recent list of SFP transceiver modules and cables available for the SFP port, contact your
H3C Support or marketing staff.
For the specifications of H3C SFP transceiver modules and cables, see
H3C Transceiver Modules Use
r
Guide
.
SFP+ port
The switch provides four fixed SFP+ ports on the front panel. To connect the peer SFP+ ports over a long
distance, use SFP/SFP+ transceiver modules and fibers. To connect the peer SFP+ ports over a short
distance, use SFP/SFP+ cables. You can install the GE SFP transceiver modules and cables in Table 23,
1
0-GE SFP+ transceiver modules in Table 24, and 1
0-GE SFP+ cables in Table 25 in the SFP+ ports.

Table of Contents

Other manuals for H3C S5560-EI series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5560-EI series and is the answer not in the manual?

H3C S5560-EI series Specifications

General IconGeneral
BrandH3C
ModelS5560-EI series
CategorySwitch
LanguageEnglish

Related product manuals