EasyManua.ls Logo

Hach EZ Series - Section 3 Online user manual

Hach EZ Series
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 1 General specifications (continued)
Specification Details
Communication USB port for data transfer
Optional: Ethernet, Modbus
Relay Five power relays (PCT), contact loading maximum 24 VDC, 0.5 A (resistive load)
Five potential free contact (FCT), maximum loading 24 VDC, 0.5 A (resistive load)
Ethernet connection Controller: Intel 82551ER
Transfer rate: 10/100 Mbps
Connector: RJ45 twisted pair (10 Base T / 100 Base T)
Cables: S/STP (category 5)
Alarms Malfunctioning alarm (potential free contact)
User interface IP65 flat color TFT touch screen (5.7 in.)
Ethernet 10 M (RJ45) NE 2000 compatible, Compact flash slot
System clock Battery life 4 years (approximately)
Certifications CE, ETL certified to UL and CSA safety standards, UKCA
Warranty USA: 1 year, EU: 2 years
Table 2 Ethernet configuration (optional)
Specification Description
Connection Remote TCP/IP server
IP address 192.168.10.180
3
Service port 502
Modbus point type 40001–...
Read/write protocol Holding register
Table 3 RS232/485 configuration (optional)
Specification Description
Baud rate 9600
Parity None
Data bits 8 (word length)
Stop bits 1
Protocol None
Modbus point type 40001–40100 (holding register)
Transmission mode RTU
Device ID (default) 1
Section 3 Online user manual
This Basic User Manual contains less information than the User Manual, which is available on the
manufacturer's website.
3
Standard value, user-programmable
4 English

Table of Contents

Related product manuals