Table 20 Parameters and default settings (continued)
Parameter Default setting
Bypass during analysis Disabled
Average last results Disabled
Flow during idle With conductivity
Control with digital inputs Disabled
Stabilization – time between analysis 2 hours
Stabilization – time 10 minutes
System settings
Instrument name PAT700SNXXXX (XXXX = serial number)
Language English
Time format 24-hour
Temperature display °C
Conductivity display Uncompensated conductivity
Static TCP/IP address 192.168.0.105
Static gateway 255.255.255.0
DNS server Blank
WINS server Blank
DHCP Enabled
Alarm setup
TOC upper limit 500 ppb
TOC alarm Disabled
Conductivity alarm Disabled
Analog outputs setup
TOC zero 0.0
TOC full scale 2000
Conductivity zero 0.0
Conductivity full scale 20.0
Temperature zero 0.0
Temperature full scale 100
On error, return 2.0
Printer setup
Printer model DPU-414
TOC print Continuous
Conductivity print Disabled
Conductivity print interval 1 minute
Conductivity % change 1 %
English 55
To Next Page
Loading...
