12
Operating Manual
POWER CLAMP
English
Quality Wins.
© 2021/09 Haimer POWER CLAMP
POWER CLAMP Economic Plus
(coil V 2008),
POWER CLAMP Economic Plus
NG (coil VS 32 H, VS 32 M or
13kW HD)
The POWER CLAMP Economic Plus also
has a cooling unit and cooling body for
rapid cooling of the shrink fit chuck.
The Economic Plus version can be up-
graded to the Comfort version with an
add-on set.
POWER CLAMP Comfort
(coil V 2008),
POWER CLAMP Comfort NG
NG (coil VS 32 H, VS 32 M or
13kW HD)
The POWER-CLAMP Comfort provides
the full configuration for efficient work.
In addition to cooling, this device has
a turntable with three shrinking sta-
tions. This makes possible continuous
operation without any breaks.
POWER CLAMP Profi Plus NG
(coil VS 32 H or VS 32 M or
20 kW HD)
The POWER CLAMP Profi Plus NG pro-
vides a universal solution for the shrink
fitting of tools. The special electronics
have double the capacity compared
to the other models. Carbide and HSS
tools of up to 50 mm in diameter can be
shrunk by using an additional coil. Cool-
ing and a turntable with three shrinking
stations are provided as standard.
The unit has an additional cooling body
to cool large shrink fit chucks.
It is not possible to upgrade the standard
versions to the Profi Plus version.
Device Description
To Next Page