18
Operating Manual
POWER CLAMP
English
Quality Wins.
© 2021/09 Haimer POWER CLAMP
3 Transport and Packaging
3.1 Delivery
The POWER-CLAMP shrink fit machine is supplied in suitable packaging so that it can reach its
destination in perfect condition during normal transport.
Note:
The carrier is liable for any transport damage. If any signs of damage are visible on the packaging
that indicate damage to the contents, please contact the carrier immediately to make a claim for
damages.
Transport and storage should be completed under normal conditions, i.e. at temperatures between
+5°C and +70°C and at a relative humidity of maximum 80%.
Attention!
Storage and transport under the wrong conditions may cause permanent
damage to the machine. The damage may not be evident from the outside.
In this case the manufacturer will not accept any guarantee or liability for the consequences.
3.2 Unpacking the machine
Remove all packaging and remove the device with all accessories.
Check for whether all parts of the POWER-CLAMP shrink fit machine are present according to the
delivery note and that all documents are complete and that everything is undamaged.
Compare the information on the rating plates against the delivery note and your ordering documents.
If you do not wish to keep the packaging for later use, e.g. return shipment for repairs, dispose of
it ecologically.
Transport and Packaging
To Next Page