HAIMER Basic - Shrink Fit Menu

32
Operating Manual
POWER CLAMP
English
Quality Wins.
© 2021/09 Haimer POWER CLAMP
5.2.1 Shrink fit menu
The shrink fit chuck being used currently is always shown on the
display.
Standard
Ø 10 - 12
pos. #4
Type of
shrink fit chuck
Setting the
coil
Size of
shrink fit chuck
A3
Shrinking code
• Key Jump to the previous chuck or Automatic
• Key
Jump to the next chuck or Automatic
• Keys
Jump to the next chuck type (simultaneously)
• Key
Retain display of shrink fit parameters
Parameter
7,0 kHz
545 E
525 V
4.5 s
450 r
23 °C
Max. Heating Time
Temperature
Electronics
Frequency
Energy
Tool check value
with tolerance
Voltage in
intermediate circuit
• Start key of the coil Start the shrink fit process
or
When setting the system of units to "Inch / mm"
• Key
Switch system of units mm <
—
> Inch
3 sec.
Operation