HAIMER Basic - Disposing of the Machine; Technical Data

64
Operating Manual
POWER CLAMP
English
Quality Wins.
© 2021/09 Haimer POWER CLAMP
9 Technical Data
POWER CLAMP Basic shrink fit machine:
Suitable for tools: ................................................................. HM, Ø 3 - 32 mm, h6
HSS + extensions, 3 - 32 mm, h6
Mains connection (the details given on the rating plate shall apply):
Nominal voltage ..................................................................3 x 400 - 480 V ˜
Min. actual operating voltage ........................................... 3 x 360 V ˜
Max. actual operating voltage .......................................... 3 x 500 V ˜
Frequency ............................................................................. 50 - 60 Hz
Power consumption ............................................................ 10 kVA
Fuse for mains supply .........................................................3 x 16 A
Unclamping and clamping time ......................................... approx. 8 seconds
Dimensions (W x D x H) ..................................................... approx. 670 x 500 x 890 mm
Weight .................................................................................. approx. 35 kg
POWER CLAMP shrink fit machine
Economic, Economic NG
Economic Plus, Economic Plus NG
Comfort, Comfort NG
Preset NG:
Suitable for tools: ................................................................. HM, Ø 3 - 32 mm, h6
HSS + extensions, 3 - 32 mm, h6
Mains connection (the details given on the rating plate shall apply):
Nominal voltage ..................................................................3 x 400 - 480 V ˜
Min. actual operating voltage ........................................... 3 x 360 V ˜
Max. actual operating voltage .......................................... 3 x 500 V ˜
Frequency ............................................................................. 50 - 60 Hz
Power consumption ............................................................ 13 kVA
Fuse for mains supply .........................................................3 x 16 A
Unclamping and clamping time ......................................... approx. 5 seconds
Dimensions (W x D x H) ..................................................... approx. 870 x 600 x 1,000 mm
Weight .................................................................................. approx. 45 kg
8 Disposing of the machine
At the end of its service life the machine should be professionally dismantled and disposed of in
accordance with national regulations.
Please consider the following when disposing of components of the machine:
• Make sure metal parts are placed in the metal recycling waste fraction
• Make sure plastic parts are placed in the plastic recycling waste fraction
• Make sure electrical/electronic components are placed in the special processing waste fraction.
Recommendation: Please contact a specialised disposal company.
Technical data