HAIMER Basic - Switching the Devices off

54
Operating Manual
POWER CLAMP
English
Quality Wins.
© 2021/09 Haimer POWER CLAMP
Operation
5.5 Switching the devices off
In daily use of the units:
• Switch off both devices are work, using the mains switch.
• Clean the shrink fit machine as required
(see section "Service and maintenance“).
For longer periods of disuse:
• Switch off both devices with the mains switch.
• Disconnect the power cables for both.
• Clean the shrink fit machine (see section 5).
• Top up the water tank of the SPEED COOLER. The cooling coil in the water tank must be com-
pletely covered.