HAIMER Basic - Read Program; History

Operating Manual
35
POWER CLAMP
English
Quality Wins.
© 2021/09 Haimer POWER CLAMP
Read Programm
Read Programm
Yes / No: No
Read Programm
Yes / No: Yes
Reading
Programm
Back to
Shrink Fit menu
key
key
key
key
key
key
key
Operation
5.2.5 Read program
The software can be updated with this function. The parameters that had been set previously are
lost when this is done.
The update is done via the USB interface. A PC with suitable software is required to do this. The
update should therefore only be carried out by suitably trained persons.
History
Window 1
Window 2
Window 3
History
Display
Exporting history
via USB
History
Print
key
key
key
key
key
key
key
key
key
key
key
key
key
Back to
Shrink Fit menu
5.2.6 History
The data from past shrinking operations is stored in the history. The data can be shown on the
display or sent to a PC via the USSB interface. This data makes is easier to diagnose problems.