2 8 | www.HandiQuilter.com
The In nity uses the MR needle system. Note that the needle has a
round shank rather than a shank with a at side like home sewing
m ac h i n e s u s e .
If you use the recommended needle, you will experience:
• Fewer skipped s tches
• Less needle breakage
• Less thread breakage, especially at high speeds
• Less thread splicing or shredding
• Op mum fabric protec on
 IMPORTANT: Change the needle regularly. We recommend you use a new needle for each new quilt
loaded on the machine, and any me the needle becomes bent, dull, or burred.
U CAUTION: A damaged needle may result in poor s tching quality or may even damage the machine
or your quilt.
To change the needle
ONLINE: For more informa on about changing the needle, watch the video Changing the Needle at:
h p://www.handiquilter.com/videos/hq-in nity/222/.
1 . Move the needle bar to the up posi on by pressing the needle up/down control on the handles.
2 . Turn o all power to the machine.
3. Loosen the needle bar clamp screw with the
2.5mm hex wrench.
4 . Remove the old needle by pulling it down. Discard the old needle in a safe way.
Needle bar clamp
screw
Sight hole
To Next Page
Loading...
