handi quilter Infinity 26 - Important Safety Information

6 | www.HandiQuilter.com
Important Safety Information (English)
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon. See the full Declaraon of Conformity
in the Appendix.
 IMPORTANT: Do not operate your HQ Innity quilng machine unl you have completely read the
informaon contained in this manual. Please keep all packaging and order informaon for warranty
purposes.
Read all instrucons before using.
When using this machine, basic safety precauons should always be taken, including the following:
DANGER — To reduce the risk of electric shock:
• A quilng machine should never be le unaended when plugged in. Always unplug the machine from
the electrical outlet immediately aer using and before cleaning.
WARNING — To reduce the risk of burns, re, electric shock, or injury to persons:
• The HQ Innity is heavy. Never aempt to li it alone. Always use two people when liing. Always
li from the throat of the machine, not from the handlebars.
• Always unplug the HQ Innity from the electrical outlet when performing any maintenance,
changing the needle, removing thread locks, or when le unaended.
• Keep ngers away from all moving parts. Use cauon around the needle or sharp external
components.
• Change the needle oen. Do not use bent or dull needles. “Every quilt deserves a new needle”.
• Switch the machine to the symbol o, or 0, posion to turn it o when making any adjustments in
the needle area, such as threading needle, changing needle, threading bobbin, changing hopping
f o o t , an d s o f o r t h .
• Never drop or insert foreign objects into any opening.
• The HQ Innity should only be used indoors away from moisture.
• The HQ Innity should not be stored or used in extreme temperatures.
• Use the HQ Innity only for its intended use as described in this manual.
• To disconnect from the wall outlet, push the switch to the o posion, then remove the plug from
outlet pulling from the plug, not the cord. Never operate the HQ Innity if the cord is damaged or
not working correctly. If a mechanical or electrical problem is encountered, return the HQ Innity