EasyManua.ls Logo

handi quilter Infinity 26 - Safe Machine Operation Procedures

handi quilter Infinity 26
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HQ Innity User Manual | 7
to the nearest authorized service center or the manufacturer for examinaon, repair, electrical, or
mechanical adjustment.
It is not recommended that the HQ Innity quilng machine be used with any machine quilng
frame other than those recommended by Handi Quilter.
Use this quilng machine only for its intended use as described in this manual. Use only
aachments recommended by the manufacturer as contained in this manual.
Never operate this quilng machine if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water. Return the quilng machine to the nearest
authorized dealer or service center for examinaon, repair, electrical or mechanical adjustment.
Never operate the machine with any air openings blocked. Keep venlaon openings of the
machine free from the accumulaon of lint, dust, and loose cloth.
Do not operate where aerosol (spray) products are being used or where oxygen is being
ad m i n i s t e r e d .
Do not use bent needles.
This sewing machine is not intended for use by young children or inrm persons without
supervision.
Save these instrucons.
T h i s m ac h i n e i s i n t e n d e d f o r h o u s e h o l d u s e .
Disclaimer
Handi Quilter and its Representaves are in no way legally responsible or liable for damage to the HQ
Innity when used improperly or not in accordance with the guidelines stated in this manual or when used
on machine quilng frames not recommended by Handi Quilter.
To use the machine safely
1 . Carefully watch the needle when sewing. Do not touch the hand wheel, take up lever, needle, or other
moving parts.
2 . Turn the machine o and unplug the cord in the following cases:
when you have stopped using the machine
when you replace or remove the needle or any other part
when you check or clean the machine
when you leave the machine unaended
3. Connect the machine directly to the wall outlet or to a surge protector that connects directly to the
wall outlet. Do not use extension cords.

Table of Contents

Related product manuals