handi quilter Infinity 26 - Using Your Machine

HQ Innity User Manual | 2 7
Using Your Machine
Power Switch
There are two power switches for your machine. The main power switch is at the rear of the machine and
another power switch is at the front of the machine for added convenience.
The machine is turned on when both switches are turned on. The machine is turned o when both
switches are o. However, you may turn o the machine funcons by turning o only the front switch if
you will be returning to quilng within a day.
Turn on the back switch rst by toggling the switch from the 0 posion to the 1 posion. Then turn on
the front switch by pressing it. The front switch will not turn on the machine unless the back switch is
already on.
 IMPORTANT: If you will not be using the machine for more than a day, we recommend you turn o
both switches and unplug the power cord from the power source.
 IMPORTANT: Refer to the safety instrucons.
Lighng
The Innity includes several lights to make it easy for you to see your quilng area: a light under the throat
of the machine, a light ring that illuminates the needle and stching area, and lights on the handlebars that
provide addional light to the quilng area. You can also turn on UV lights when you need to see white
thread or white chalk on white fabric.
Turning the lights on and o is done through the touch-screen display. For more informaon about
t u r n i n g o n t h e m ac h i n e l i g h t s , s e e To control the lights o n t h e m ac h i n e i n t h e Toolbar Opons secon
o f t h i s m an u al .
Machine Needle
Use only the recommended needle system for your Innity quilng machine. The machine was med to
use this specic type of needle and it is designed to work with the high quilng speeds and muldireconal
stching the Innity oers.