HY8200 User’s Manual
37
6.The command parser is case-insensitive for parsing command strings.
7.The command parser supports abbreviated form of command and the detailed see the following section.
7.3 Symbol Stipulation and Definition
This chapter uses some symbols that are not part of the command tree, but only for a better
understanding of the command string.
<> The text in angle brackets indicates the parameter of the command.
[ ] The text in square brackets indicates the optional command.
{} When the curly brackets contain several parameter items, it means that only one item can be selected from them.
( ) The abbreviated form of the parameter is enclosed in parentheses.
Capital letter Abbreviated form of the command.
7.4 Command Tree Structure
SCPI commands have a tree-like structure with three level (note: the command parser of this instrument can
parse any level), where the highest level is called the subsystem command. SCPI uses a colon (:) to separate
high level commands from low level commands.
For Example
ROOT:CCC:DDD ppp
ROOT Subsystem command
CCC Second level
DDD Third level
ppp Parameter
To Next Page
Loading...
Need help?
General