HY8200 User’s Manual
39
Note: The multiplying power is case-insensitive, and the writing is differently from the standard name.
7.5.3 Separator
The instrument command parser can only receive allowable separator. Other separator will cause error
“Invalid separator”.
The allowable separator is as follows.
; Semicolon is for separating two commands.
For Example AAA:BBB 100.0 ; CCC:DDD
: Colon is for separating command tree or restart the command tree.
For Example AAA : BBB : CCC 123.4; : DDD : EEE 567.8
? Question mark is for querying.
For ExampleAAA ?
□ Blank is for separating the parameter.
For Example AAA:BBB
□
1.234
7.5.4 Error Code
7.5.5 Command Reference
All commands is explained by the subsystem command order.
SOURce
Setup subsystem
To Next Page
Loading...
Need help?
General