HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
49
// Set the load size of CC mode to 3A in battery mode
Query Syntax
[SOURce]:BATtery:CURRent?
// Query the load size of CC mode in battery mode
Return Parameter
<NR2>
7.6.33 [SOURce]:BATtery:POWer
[SOURce]:BATtery:POWer Set the load size of CP mode in battery mode
Command Syntax
[SOURce]:BATtery:POWer
Parameter
0.1~400 | MINimum | MAXimum
Unit
W
Reset Value
1
For Example
BATtery: POWer 3
// Set the load size of CP mode to 3W in battery mode
Query Syntax
[SOURce]:BATtery:POWer?
// Query the load size of CP mode in battery mode
Return Parameter
<NR2>
7.6.34 [SOURce]:BATtery:RESistance
[SOURce]:BATtery:RESistance Set the load size of CR mode in battery mode
Command Syntax
[SOURce]:BATtery:RESistance
Parameter
0.05~7500 | MINimum | MAXimum
Unit
Ohm
Reset Value
1
For Example
BATtery:RESistance 3
// Set the load size of CR mode to 3ohm in battery mode
Query Syntax
[SOURce]:BATtery:RESistance?
// Query the load size of CR mode in battery mode
Return Parameter
<NR2>
7.6.35 [SOURce]:BATtery[:VOLTage]:Unloade
[SOURce]:BATtery[:VOLTage]:Unloade Set the cut-off size of voltage in battery mode
Command Syntax
[SOURce]:BATtery[:VOLTage]:Unloade
Parameter
0.01~150 | MINimum | MAXimum
Unit
V
Reset Value
1
For Example
BATtery:Unloade 3 // Set the cut-off size of voltage to 3V in battery mode
Query Syntax
[SOURce]:BATtery[:VOLTage]:Unloade?
// Query the cut-off size of voltage in battery mode
Return Parameter
<NR2>
7.6.36[SOURce]:BATtery:CAPAcity?
[SOURce]:BATtery:CAPAcity? Query the battery capacity
Command Syntax
[SOURce]:BATtery:CAPAcity?

HAO INSTECH HY8200 Series Specifications

General

Sampling Rate	1GSa/s
Power Supply	100-240VAC, 50/60Hz
Bandwidth	200 MHz
Channels	2
Display	7-inch TFT LCD
Display Resolution	800 * 480
Trigger Modes	Edge, Pulse, Video, Slope
Interface	USB Host, USB Device
Accuracy	±3%
Communication Interface	USB
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% RH