HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
45
Parameter
0~MAX |MINimum|MAXimum
Unit
V
Reset Value
MAXimum
For Example
VOLT 5 // Set the voltage to 5V in CV mode
Query Syntax
[SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
// Query the voltage in CV mode
Return Parameter
<NR2>
7.6.20 [SOURce]:RESistance
[SOURce]:RESistance Set the resistance in CR mode
Command Syntax
[SOURce]:RESistance[:LEVel][:IMMediate][:AMPLitude]<NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
ohm
Reset Value
MAXimum
For Example
RES 5 // Set the resistance to 5ohm in CR mode
Query Syntax
[SOURce]:RESistance[:LEVel][:IMMediate][:AMPLitude]?
// Query the resistance in CR mode
Return Parameter
<NR2>
7.6.21[SOURce]:POWer
[SOURce]:RESistance Set the power in CP mode
Command Syntax
[SOURce]:POWer[:LEVel][:IMMediate][:AMPLitude]<NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
W
Reset Value
MINimum
For Example
POW 10 // Set the power t0 10W in CP mode
Query Syntax
[SOURce]:POWer[:LEVel][:IMMediate][:AMPLitude]?
// Query the power in CP mode
Return Parameter
<NR2>
7.6.22 [SOURce]:DYNamic:LOW
[SOURce]:DYNamic:IA 2 command equivalences
[SOURce]:DYNamic:LOW Set the load current (IA) in dynamic mode
Command Syntax
[SOURce]:DYNamic:LOW[:LEVel]<NRF+>
Command Syntax
[SOURce]:DYNamic:IA[:LEVel<NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
A
Reset Value
0
For Example
DYN:LOW 10 or DYN:IA 10
// Set the load current (IA) to 10A in dynamic mode
Query Syntax
[SOURce]:DYNamic:LOW[:LEVel]?
// Query the low level of load current (IA) in dynamic mode

HAO INSTECH HY8200 Series Specifications

General

Brand	HAO INSTECH
Model	HY8200 Series
Category	Measuring Instruments
Language	English