HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
46
Query Syntax
[SOURce]:DYNamic:IA[:LEVel?
// Query the low level of load current (IA) in dynamic mode
Return Parameter
<NR2>
7.6.23 [SOURce]:DYNamic:LOW:DWELl
[SOURce]:DYNamic:TA 2 command equivalences
[SOURce]:DYNamic:LOW:DWELl Set the duration (TA) for the load current in dynamic mode
Command Syntax
[SOURce]:DYNamic:LOW:DWELl<NRF+>
Command Syntax
[SOURce]:DYNamic:TA:DWELl<NRF+>
Parameter
MIN~MAX |MINimum|MAXimum
Unit
mS
Reset Value
0.1
For Example
DYN:LOW:DWELL 10 or DYN:TA:DWELL 10
// Set the duration (TA) to10 mS for the load current in dynamic mode
Query Syntax
[SOURce]:DYNamic:LOW:DWELl?
// Query the duration (TA) of the load current in dynamic mode
Query Syntax
[SOURce]:DYNamic:TA:DWELl?
// Query the duration (TA) of the load current in dynamic mode
Return Parameter
<NR2>
7.6.24 [SOURce]:DYNamic:HIGH
[SOURce]:DYNamic:IB 2command equivalences
[SOURce]:DYNamic:HIGH Set the load current (IB) in dynamic mode
Command Syntax
[SOURce]:DYNamic:HIGH[:LEVel]<NRF+>
Command Syntax
[SOURce]:DYNamic:IB[:LEVel]<NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
A
Reset Value
0
For Example
DYN:HIGH 1 or DYN:IB 1
// Set the load current (IB) to 1A in dynamic mode
Query Syntax
[SOURce]:DYNamic:HIGH[:LEVel]?
// Query the high level of the load current (IB) in dynamic mode
Query Syntax
[SOURce]:DYNamic:IB[:LEVel]?
// Query the high level of the load current (IB) in dynamic mode
Return Parameter
<NR2>
7.6.25 [SOURce]:DYNamic: HIGH:DWELl
[SOURce]:DYNamic:TB 2command equivalences
[SOURce]:DYNamic: HIGH:DWELl Set the duration for the load current (IB) in dynamic mode
Command Syntax
[SOURce]:DYNamic: HIGH:DWELl<NRF+>
Command Syntax
[SOURce]:DYNamic:IB:DWELl<NRF+>

HAO INSTECH HY8200 Series Specifications

General

Brand	HAO INSTECH
Model	HY8200 Series
Category	Measuring Instruments
Language	English