HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
43
Unit
A/us
Reset Value
1
For Example
CURR:SLEW 1 // Set the rising rate for the current to 1 A/us
Query Syntax
[SOURce]:CURRent:SLEW:RISE? // Query the rising rate of the current
Return Parameter
<NR2>
7.6.12 [SOURce]:CURRent:SLEW:FALL
[SOURce]:CURRent:SLEW:FALL Set the falling rate for the current
Command Syntax
[SOURce]:CURRent:SLEW:FALL <NRF+>
Parameter
MIN~MAX |MINimum|MAXimum
Unit
A/us
Reset Value
1
For Example
CURR:SLEW 1 // Set the falling rate for the current to 1 A/us
Query Syntax
[SOURce]:CURRent:SLEW:FALL? // Query the falling rate of the current
Return Parameter
<NR2>
7.6.13 "[SOURce]:VOLTage:SLEW
[SOURce]:VOLTage:SLEW Set the rising and falling rate for the voltage
Command Syntax
[SOURce]:VOLTage:SLEW[:BOTH] <NRF+>
Parameter
MIN~MAX |MINimum|MAXimum
Unit
V/ms
For Example
VOLT:SLEW 0.3 // Set the rising and falling rate for the voltage to 0.3 V/ms
Query Syntax
[SOURce]:VOLTage:SLEW?
// Query the rising and falling rate of the voltage
Return Parameter
<NR2>
7.6.14 [SOURce]:CURRent:PROTection
[SOURce]:CURRent:PROTection Set the protective value for the current
Command Syntax
[SOURce]:CURRent:PROTection[:LEVel] <NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
A
Reset Value
MAXimum
For Example
CURR:PROT 3 // Set the protective value for the current to 3A
Query Syntax
[SOURce]:CURRent:PROTection[:LEVel]?
// Query the protective value of the current
Return Parameter
<NR2>
7.6.15 [SOURce]:POWer:PROTection
[SOURce]:POWer:PROTection Set the protective value for the power
Command Syntax
[SOURce]:POWer:PROTection[:LEVel] <NRF+>
Parameter
0~MAX |MINimum|MAXimum

HAO INSTECH HY8200 Series Specifications

General

Brand	HAO INSTECH
Model	HY8200 Series
Category	Measuring Instruments
Language	English