HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
44
Unit
W
Reset Value
MAXimum range
For Example
CURR:PROT 100 // Set the protective value for the power to 100 W
Query Syntax
[SOURce]:POWer:PROTection[:LEVel]?
// Query the protective value of the power
Return Parameter
<NR2>
7.6.16 [SOURce]:VOLTage[:LEVel]:ON
[SOURce]:VOLTage[:LEVel]:ON Set voltage value of the start load (Von)
Command Syntax
[SOURce]:VOLTage[:LEVel]:ON <NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
V
Reset Value
1
For Example
VOLT:ON 3 // Set voltage value of the start load to 3V
Query Syntax
[SOURce]:VOLTage[:LEVel]:ON?
// Query voltage value of the start load
Return Parameter
<NR2>
7.6.17 [SOURce]:VOLTage[:LEVel]:OFF
[SOURce]:VOLTage[:LEVel]:OFF Set voltage value of the start unload (Voff)
Command Syntax
[SOURce]:VOLTage[:LEVel]:OFF <NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
V
Reset Value
0.5
For Example
VOLT:OFF 2 // Set voltage value of the start unload to 2V
Query Syntax
[SOURce]:VOLTage[:LEVel]:OFF?
// Query voltage value of the start unload
Return Parameter
<NR2>
7.6.18 [SOURce]:CURRent
[SOURce]:CURRent Set the current in CC mode
Command Syntax
[SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude] <NRF+>
Parameter
0~MAX |MINimum|MAXimum
Unit
A
For Example
CURR 5 // Set the current to 5A in CC mode
Query Syntax
[SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude]?
// Query the current in CC mode
Return Parameter
<NR2>
7.6.19 [SOURce]:VOLTage
[SOURce]:VOLTage Set the voltage in CV mode
Command Syntax
[SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRF+>

HAO INSTECH HY8200 Series Specifications

General

Brand	HAO INSTECH
Model	HY8200 Series
Category	Measuring Instruments
Language	English