HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
40

SYSTem System subsystem

MEASure Measurement subsystem
 CHANnel Channel subsystem
Common Command
 *IDN? Instrument query subsystem
 *RST Reset the instrument state
7.6 SYSTem Subsystem
SYSTem
:ERRor[:NEXT]?
:ERRor:COUNt?
:VERSion?
:BEEPer[:STATe]
:BEEPer[:STATe]?
Figure 0-1 SYSTem Subsystem Tree
* The parameter is set by SYSTem subsystem will not saved in the instrument.
It should be reset when reboot the instrument.
7.6.1 SYSTem:ERRor[:NEXT]?
SYSTem:ERRor[:NEXT]? Query the error message
Query Syntax
SYSTem:ERRor[:NEXT]? // Query the error message
Query Response
Error message
7.6.2 SYSTem:ERRor:COUNt?
SYSTem:ERRor:COUNt? Query the count of error message.
Query Syntax
SYSTem:ERRor:COUNt? // Query the count of error message
Query Response
The count of error message
7.6.3 SYSTem:VERSion?
SYSTem:VERSion? Query the version of SCPI system
Query Syntax
SYSTem:VERSion? // Query the version of SCPI system
Query Response
SCPI system version

HAO INSTECH HY8200 Series Specifications

General

Brand	HAO INSTECH
Model	HY8200 Series
Category	Measuring Instruments
Language	English