HAO INSTECH HY8200 Series User Manual

HY8200 User’s Manual
48
Query Syntax
[SOURce]:DYNamic:SLEW:FALL?
// Query the falling rate of the current in dynamic mode
Return Parameter
<NR2>
7.6.29 [SOURce]:DYNamic:MODE
[SOURce]:DYNamic:MODE Set the operation mode for the dynamic mode
Command Syntax
[SOURce]:DYNamic:MODE <mode>
Parameter
CONTinuous | PULSe | TOGGle
Reset Value
CONTinuous
For Example
DYN:MODE PULS
// Set the operation mode to pulse mode in dynamic mode
Query Syntax
[SOURce]:DYNamic:MODE?
// Query the operation mode of the dynamic mode
Return Parameter
<CRD>
7.6.30 [SOURce]:DYNamic:REPeat
[SOURce]:DYNamic:REPeat Se the repeat times for the dynamic mode
Command Syntax
[SOURce]:DYNamic:REPeat
Parameter
0
~
99999 | MINimum | MAXimum | LOOP
For Example
DYNamic:REPEAT 10
// Set the repeat times to 10 for the dynamic mode
Query Syntax
[SOURce]:DYNamic:REPeat?
// Query the repeat times of the dynamic mode
Return Parameter
<NR2>
7.6.31 [SOURce]:BATtery:MODE
[SOURce]:BATtery:MODE Set the operation mode in battery mode
Command Syntax
[SOURce]:BATtery:MODE <mode>
Parameter
CURRent | RESistance | POWer
Reset Value
CURRent
For Example
BATery:MODE CURRent
// Set the operation mode to CC mode in battery mode
Query Syntax
[SOURce]:BATtery:MODE?
// Query the operation mode in battery mode
Return Parameter
<CRD>
7.6.32 [SOURce]:BATtery:CURRent
[SOURce]:BATtery:CURRent Set the load size of CC mode in battery mode
Command Syntax
[SOURce]:BATtery:CURRent
Parameter
0.01~20 | MINimum| MAXimum
Unit
A
Reset Value
1
For Example
BATtery:CURRent 3

HAO INSTECH HY8200 Series Specifications

General

Brand	HAO INSTECH
Model	HY8200 Series
Category	Measuring Instruments
Language	English