HY8200 User’s Manual
3
Please ensure that the main supply does not exceed 10% of rated operating range to prevent product
damage.
Use the correct power cord
Only use the dedicated Haoyi power cord to connect the measured power supply and the electronic
load to ensure that there is no overheat by short-circuit current, otherwise electric shock may occur.
Input voltage
Please notice the product symbols before connecting. The instrument supports 2 kinds of AC input
method: 110V and 220V. Please check if the switch of load matches with the input power source and if
the fuse is correctly installed.
Please do not use the instrument in inflammable and explosive environment.
Do not use or store the instrument in high temperature, high humidity, flammable, explosive and strong
magnetic field environments.
Safety symbols
Environment-Friendly Use Period (EFUP)：
This product contains certain hazardous substances and
can be used safely during its environmental-friendly use
period (EFUP) of 40 years, as shown in the symbol on the
left. If the specified time is exceeded, the product should
be recovered.
Waste Electrical and Electronic Equipment (WEEE) Instruction 2002/96/EC
Do not dispose the product and its accessories in trash
bin.
To Next Page
Loading...
Need help?
General