6 - Menu 2 Setup
6.2
Display text Description.
μ
ATTENTION! As some readouts need extra sensors, the relevant sensor has to be connected to get a readout.
[2.1.1.01 Program] Shows programmed volume rate
[2.1.1.02 Flow rate] Flow rate per minute sprayed out through the boom
[2.1.1.03 Time] Actual time
[2.1.1.04 Work rate] Rate shown in acres per hour or hectares per hour
[2.1.1.05 Volume rate] Actual rate in gallon per acre or liter per hectare
[2.1.1.06 Tank contents] Main tank contents
[2.1.1.07 Speed] Driving speed
[2.1.1.08 Volume sprayed] Readouts for volume sprayed in currently active register
[2.1.1.09 Area sprayed] Readouts for area sprayed in currently active register
[2.1.1.10 Active boom size] Active boom size including End nozzle
[2.1.1.11 Pressure] Displays spray pressure if sensor is fitted
[2.1.1.12 Fan speed] Displays Twin fan speed if sensor is fitted
[2.1.1.13 Wind speed] Displays wind speed if sensor is fitted
[2.1.1.14 Wind direction] Displays wind direction if sensor is fitted
[2.1.1.15 Humidity] Displays relative humidity if sensor is fitted
[2.1.1.16 Temperature] Displays ambient temperature if sensor is fitted
[2.1.1.17 PTO Revolutions] Displays revolutions if sensor is fitted
[2.1.1.18 Name “Extra 1”] Readout from extra sensor 1 frequency
[2.1.1.19 Name “Extra 2”] Readout from extra sensor 2 frequency
[2.1.1.20 Name “Extra 3”] Readout from extra sensor 3 analog
[2.1.1.21 Name “Extra 4”] Readout from extra sensor 4 analog
[2.1.1.22 Voltmeter] Displays system voltage. Useful when fault finding
[2.1.1.23 Agitation] Agitation valve opening
[2.1.1.24 Rinse Tank Content] Rinse tank calculated content
To Next Page
Loading...
