6.1
6 - Menu 2 Setup
Menu 2.1 Display readout
General info
The following menu explanations assume you have mastered the general keystrokes and you can “find your way” to the
specific menu. If this is not so, please re-read section “Keys”.
Menu 2.1.1 Display readout
It is possible to choose which functions are shown in the 4 different
boxes (A, B, C and D) of the display.
1. Go to menu [2.1 Display readout].
2. Use ¿ or ª to choose which of following boxes you want the
data shown in and press # to confirm.
2.1.1 Show upper middle (A)
2.1.2 Show upper right (B)
2.1.3 Show lower middle (C)
2.1.4 Show lower right (D)
3. Choose a submenu e.g. menu [2.1.1.04 Work rate]. Press # to
confirm.
4. Press ~ to leave menu.
See next page for a complete list of possible display readouts.
AB
CD
To Next Page
Loading...
