8.1
8 - Menu 4 Toolbox
Menu 4.1 Measure
Trip meter
This is a simple electronic trip meter. You can measure distance. If the implement width is entered in menu [4.1.3 Working
width], area can also be measured in menu [4.1.2 Area].
Use | to clear the value.
Following submenus are possible:
[4.1.1 Distance] Measures a distance being travelled.
[4.1.2 Area] Measures the area the boom covers at a travelled distance.
[4.1.3 Working width] Menu for entering the boom working width to be measured.
[4.1.4 Stop watch] Measures the time being used.
[4.1.5 Alarm clock] Can give an alarm at a preset time.
To Next Page
Loading...
