MARK IV HD J2 TAMPER SAFETY / GENERAL PAGE 1 - 7
BULLETIN 5082505 INFORMATION REVISED 10 - 2020
1
1.2.2 Safety Information
■ OBSERVE AND FOLLOW ALL RAILROAD SAFETY RULES AND
REGULATIONS.
■ USE APPROPRIATE PERSONAL SAFETY EQUIPMENT SUCH AS SAFETY
GOGGLES, HARD HAT, SAFETY SHOES, HEARING PROTECTION, ETC.
■ KNOW POSITIONS AND FUNCTIONS OF ALL CONTROLS BEFORE
ATTEMPTING TO OPERATE THIS MACHINE.
■ DO NOT LET ENGINE RUN WHEN UNATTENDED.
■ THIS MACHINE IS DESIGNED WITH YOUR SAFETY IN MIND. DO NOT
DISCONNECT AND/OR ATTEMPT TO OVERRIDE SAFETY FEATURES.
■ BE SURE ALL PERSONS ARE CLEAR OF MACHINE BEFORE ENABLING
TRAVEL MODE OR WORK MODE TO ENABLE HYDRAULIC SYSTEM AT
FULL SYSTEM PRESSURE.
■ IF MACHINE IS EQUIPPED WITH A STROBE LIGHT AND RAILROAD
RULES AND REGULATIONS REQUIRE ITS USE, STROBE LIGHT MUST BE
ILLUMINATED WHEN OPERATING ON TRACK.
■ TO HELP ENSURE SAFE OPERATION OF THIS MACHINE, KEEP ALL
SAFETY DECALS CLEAN AND LEGIBLE. REPLACE SAFETY DECALS
WHEN NECESSARY WITH NEW DECALS LISTED IN PARTS MANUAL.
■ FIRE EXTINGUISHER CRADLE MUST BE UNLOCKED WHEN MACHINE IS
OPERATING ON TRACK.
■ TRACK AND WEATHER CONDITIONS WILL AFFECT STOPPING
DISTANCE. BE ALERT TO THESE CONDITIONS AND ALLOW ADEQUATE
STOPPING DISTANCE.
■ BE ALERT FOR A SUDDEN STOP SHOULD BRAKE CIRCUIT AIR
PRESSURE BE REDUCED OR LOST. EMERGENCY BRAKES MAY APPLY
SUDDENLY.
■ OPERATOR MUST LOOK IN ALL DIRECTIONS FOR PERSONS OR
OBJECTS ON OR ADJACENT TO TRACK.
CAUTION
To Next Page
Loading...