PAGE 2.1 - 26 OPERATION MARK IV HD J2 TAMPER
REVISED 10 - 2020 CONTROLS BULLETIN 5082505
2.1
2.1.3 Cab Layout - See Figure 2.1-25
When sitting in the operator’s seat inside of the Cab, the operator faces to the front of the
machine. The Cab consists of the following components:
(1) Cab Entry Door
(2) Operator’s Seat
(3) Foot Rest - Travel / Cycle Foot Switch
(4) Control Console / Keypad - Left Hand
(5) Control Console / Keypad - Right Hand
(6) Control Panel - Left
Engine Controls / Jupiter JAM / J42 Board
Satellite Radio Transceiver Option
(7) Control Panel - Center
Jupiter Monitor / Keyboard
Surfacing / Lining Indicator Panel
(8) Control Panel - Right
Power Inverter / Satellite Radio Option
(9) Cabs Fans - Upper / Lower / Rear
(10) Master Control Box
(11) Storage Compartment - Under Jumps Seats
(12) Jump Seats
(13) First Aid Kit Option
(14) Jupiter Printer / Vandalism Cover Option
(15) Cab Air Conditioner / Pressurizer Unit Option
(16) Video Monitor Option - Front Camera
(17) Fire Extinguisher Option
(18) Rear View Mirrors
To Next Page
Loading...