Harsco MARK IV - Seat Height Switch; Operator Keypad Controls - Left

MARK IV HD J2 TAMPER OPERATION PAGE 2.1 - 41
BULLETIN 5082505 CONTROLS REVISED 10 - 2020
2.1
2.1.8 Operator Armrest Controls - Left - See Figure 2.1-32
(7) Seat Height Switch
Rotate and hold the switch in the UPPER position to RAISE the operator’s seat. Rotate and
hold the switch in the LOWER position to LOWER the operator’s seat. Release the switch to
stop raising or lowering the operator’s seat.
(8) Operator Keypad Controls - Left
See Operator Left Keypad Controls for a detailed description of the controls.