MARK IV HD J2 TAMPER SAFETY / GENERAL PAGE 1 - 9
BULLETIN 5082505 INFORMATION REVISED 10 - 2020
1
1.2.2 Safety Information
■ TOW MACHINE AT A SAFE SPEED TAKING INTO ACCOUNT TRACK
CONDITIONS, WEATHER, VISIBILITY AND STOPPING DISTANCE.
■ WHEN TOWING MACHINE, BOTH FRONT AND REAR TRANSMISSIONS
MUST BE IN NEUTRAL POSITION. DO NOT EXCEED A MAXIMUM TOWING
SPEED OF 25 MPH (40 KM/H) WHEN TOWING MACHINE.
■ DO NOT ATTEMPT TO MECHANICALLY RELEASE (CAGE) ACTUATOR
SPRING CHAMBER IF ANY STRUCTURAL DAMAGE TO THE ACTUATOR
IS EVIDENT. IF DAMAGED, REMOVE ACTUATOR AND REPLACE WITH A
NEW ACTUATOR.
■ CHOCK MACHINE WHEELS BEFORE MECHANICALLY RELEASING
BRAKES
■ NEVER LEAVE MACHINE UNATTENDED WITH BRAKES MECHANICALLY
RELEASED.
FAILURE TO HEED THESE PRECAUTIONS COULD RESULT IN BODILY
INJURY AND/OR PROPERTY DAMAGE.
Note: To help ensure safe operation of this machine, keep all decals clean and legible.
Replace decals when necessary with new decals, listed in the Parts Manual for this
machine.
CAUTION
To Next Page
Loading...