PAGE 2.1 - 50 OPERATION MARK IV HD J2 TAMPER
REVISED 10 - 2020 CONTROLS BULLETIN 5082505
2.1
2.1.11 Operator Keypad Controls - Right - See Figure 2.1-35
The Operator’s Right Keypad Controls are located on the Operator’s Right Armrest. The
Operator’s Right Keypad Controls consists of the following group of keys:
A. Information Help Key Group . . . . . . . . . .Outlined in BLUE
B. Function Key Group . . . . . . . . . . . . . . . .Outlined in MAGENTA
C. Cursor Key Group . . . . . . . . . . . . . . . . . .Outlined in GREEN
D. Expanded Track View Key Group . . . . . .Outlined in RED
(A) Information Key Group - Outlined in BLUE
(1) Information Key
Press and release the Information Key, or the F6 Key on the computer keyboard to display the
Information Panel on the screen. Regardless of the panel, menu or dialog box that is open at
the time, pressing this key will give Help Information relevant to the situation. Press the Escape
Button on the displayed panel, or the Escape Key on the Right Operator Keypad or the
computer keyboard to remove the Information Panel from the screen.
(B) Function Key Group - Outlined in MAGENTA
Many of the keys in the Function Key Group appear similar to the F Keys found on the computer
keyboard and function in the same way. A feature of the System V is that any of the F Keys on
the Operator Right Keypad or on the computer keyboard, or the F Buttons that are displayed on
the computer screen may be used for convenience.
(2) F1 Key
(3) F2 Key
(4) F3 Key
(5) F4 Key
(6) F5 Key
The F1 - F5 Keys function in the same way as any F1 - F5 Button that is currently displayed on
the screen.
To Next Page
Loading...