PAGE 2.1 - 60 OPERATION MARK IV HD J2 TAMPER
REVISED 10 - 2020 CONTROLS BULLETIN 5082505
2.1
2.1.13 Miscellaneous Cab Controls
(7) Cab Fans - See Figure 2.1-41
The Cab Fans are located in the left front upper and lower corners of the cab and next to rear
cab door. The fans are turned ON or OFF using the switch located on each fan. The fans can be
used to circulate air inside the cab and also to help defrost the windows.
(8) Cab Tool Box Option - See Figure 2.1-42
The Cab Tool Box is located in the right rear corner of the cab wall next to the air conditioner /
pressurizer unit.
(9) Jupiter Printer - See Figure 2.1-43
(10) Vandalism Cover Option - See Figure 2.1-44
The Jupiter Printer is located on the right side cab wall. The printer can be used to print data
from the Jupiter software. The printer may be equipped with a Vandalism Cover that can be can
be locked when the machine is shutdown.
To Next Page
Loading...