HBM T10FS User Manual

Mechanical installation
40 A0785-150 HBM: public T10FS
sensor serves as an orientation guide for the tangential
alignment (see Fig. 5.11).
Notice
The mounting conditions are crucial for the pulse
tolerance. Preferably try to keep to or undershoot the
specified nominal (rated) distance given in Fig. 5.12. If
the prescribed distance is exceeded, or the rotor is not
optimally aligned with the stator, the pulse tolerance will
increase.
The pulse precision can be optimized by setting the
minimum distance (0.3 mm).
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Marker line
Sensor head
Radial alignment
Tangential alignment
Fig. 5.11 Alignment marking on the sensor

HBM T10FS Specifications

General

Brand	HBM
Model	T10FS
Category	Measuring Instruments
Language	English