HEIDENHAIN iTNC 530 101
3.3 File Management: Fundamentals
File names
When you store programs, tables and texts as files, the TNC adds an
extension to the file name, separated by a point. This extension
indicates the file type.
File names should not exceed 25 characters, otherwise the TNC
cannot display the entire file name. The following characters are not
permitted in file names:
. ! “ ’ ( ) * + / ; < = > ? [ ] ^ ` { | } ~
PROG20 .H
File name File type
The space (HEX 20) and delete (HEX 7F) characters are not
permitted in file names, either.
The maximum limit for the path and file name together is
83 characters (see “Paths” on page 103).
To Next Page
Loading...
