HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING

To Next Page

To Previous Page

HEIDENHAIN iTNC 530 255

9.1 Principle and Overview

QS parameters (the S stands for string) are also available on the TNC

and enable you to process texts. In principle, the same ranges are

available for QS parameters as for Q parameters (see table above).

Note that for the QS parameters the QS100 to QS199 range

is reserved for internal texts.

HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING - Page 255