HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING User Manual

HEIDENHAIN iTNC 530 561
17.13 Selecting the Axes for Generating G01 Blocks
17.13 Selecting the Axes for
Generating G01 Blocks
Application
The axis selection input field enables you to define the current tool
position coordinates that are transferred to the G01 block. To generate
a separate G01 block, press the ACTUAL POSITION CAPTURE key.
The axes are selected by bit-oriented definition similar to programming
the machine parameters:
Axis selection %11111: Transfer the X, Y, Z, IV, and V axes
Axis selection %01111: Transfer the X, Y, Z, and IV axes
Axis selection %00111: Transfer the X, Y and Z axes
Axis selection %00011: Transfer the X and Y axes
Axis selection %00001: Transfer the X axis

HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING Specifications

General

Brand	HEIDENHAIN
Model	ITNC 530 - 6-2010 DIN-ISO PROGRAMMING
Category	Control Panel
Language	English