HGST Ultrastar Serv24-HA User Manual

Note: The Heat Sink screws must be tightened to a torque setting of 12in.-lbs. Do not
over-tighten. Over-tightening may cause damage to the parts.
Figure 52: Install CPU
Figure 53: Heat Sink Installation Order
48
3 Part Replacement
User Guide 3.4 CPU and Heat Sink Module Replacement

HGST Ultrastar Serv24-HA Specifications

General

Brand	HGST
Model	Ultrastar Serv24-HA
Category	Server
Language	English