System Manual Compact Systems 7 Start-Up
HI 800 141 E Rev. 2.02 Page 57 of 110
When the processor system is connected to the supply
voltage, it automatically starts the user program
When the processor system is connected to the supply
voltage, it enters the STOP state
Operating system version contained in processor system
Resource configuration checksum
System date and time in s and ms since 1970-01-01
Global or local forcing is active.
Global and local forcing are not active.
State of the force switch
At least one force switch set
Global forcing is active.
Global forcing is not active.
Date and time of the last I/O warning in s and ms since 1970-01-
01
Last Communication Warning
[ms]
Date and time of the last communication warning in s and ms
since 1970-01-01
Last Communication Warning
[s]
Date and time of the last system warning in s and ms since 1970-
01-01
Date and time of the last I/O error in s and ms since 1970-01-01
Last Communication Error
[ms]
Date and time of the last communication error in s and ms since
1970-01-01
Last Communication Error [s]
Date and time of the last system error in s and ms since 1970-01-
01
Specifies if the online settings of the enable switch are allowed:
The subordinate enable switches can be changed online.
To Next Page
Loading...
Need help?
General
