4.4 Step Voltage Test
1
2
3
4
5
6
7
8
9
10
11
付録
索引
95
3. Press the key.
The voltage indication will stop blinking
and the tester enters the step voltage
test mode.
4.
To start the step voltage test, hold down the
key for more than one second.
The mark and the key
start blinking, and insulation resistance
or leakage current appears on the
screen. (Press the key to toggle
between them.)
Lighting
Interval for
1 step
Actual output
Elapsed time Step No.
voltage
To Next Page
Loading...
