6.4 Communicating with PC
136
6.4.2 Installing Driver
Installation procedure
1. Log in as "administrator" or as other
such administrative authority.
2. Before installing, close all applications
currently running on the computer.
3. Execute the [driverSetup_English.msi]
file inside the [/USB Driver] on the
CD-R, and follow the instructions as
shown on the screen to start the installa-
tion.
A warning message will be displayed
because it would not qualify for the "Cer-
tified for Windows" logos, but ignore it
and continue the installation.
4. After installation is completed, the instru-
ment will automatically be recognized by
the computer when connected with a
USB cable. If a search wizard screen for
new hardware is displayed, select [No,
not this time] to confirm Windows
Update connection and select [Install
the software automatially].
Even when connecting instruments of
different serial numbers, you may be
notified that a new device has been
detected. Follow the instructions on the
screen and install the device driver.
To Next Page
Loading...
