EasyManua.ls Logo

Hioki 3455 - Installing the Battery Pack (Rechargeable Nickel-Hydrogen Battery)

Hioki 3455
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.1 Supplying Power
34
2.1.2 Installing the Battery Pack
(Rechargeable nickel-hydrogen
battery)
Use the optional 9459 BATTERY PACK.
The operating time is longer than that with
alkaline batteries, and the pack is
rechargeable.
Battery pack is dispatched in an uncharged
state. Charge before use.
Charging Procedure
See 2.1.4 "Charging the Battery Pack" (page
41).
For battery operation, use only the
HIOKI Model 9459 BATTERY PACK. We
cannot accept responsibility for acci-
dents or damage related to the use of
any other batteries.
To avoid heat buildup, rupture, or leak-
age of the battery, do not use if dam-
aged, wires are exposed, or the battery/
tester connector is damaged.
To avoid electric shock, be sure to dis-
connect the test leads from the tester,
turn off power, and disconnect the AC
adapter from the tester, before installing
or removing the battery pack.
To avoid the possibility of explosion, do
not short circuit, disassemble or incin-
erate battery pack. Handle and dispose
of batteries in accordance with local
regulations.
Take care not to step on the battery pack
power cable, as this may damage it.

Table of Contents

Related product manuals