1
2
3
4
5
6
7
8
9
10
11
付録
索引
101
The tester stores measurement data, settings,
date and time in the internal memory.
Data is not erased when the power is shut off.
There are two recording methods. (Combinable)
• The content of a manual records are
viewable on the LCD of the tester.
Further, the records can be downloaded
to a PC using the PC software.
• For logging records, only the last value is
viewable on the LCD of the tester. The
entire record is viewable on a PC using
the PC software.
See 6.4 "Communicating with PC" (page 134).
• Add data No. to data to record. The data No.
serves as the address in the memory. The
table shows the data No. numbering system.
Recording Measurement
Data (Memory Function)
5
Manual
recording:
Stores held data
Logging
recording:
Stores insulation resistance
data at regular intervals.
Recording
method
Data No.
Manual
recording
A0 - A9, b0 - b9, C0 - C9, d0
- d9, E0 - E9, F0 - F9,
H0 - H9, J0 - J9, n0 - n9, P0
- P9 (100 numbers in total)
Logging
recording
Lr0 - Lr9 (10 numbers in
total. Up to 360 loggings per
data No.)
To Next Page
Loading...
