2.4 Connecting Test Lead
50
Procedure
1. Connect the alligator clip to the end of
each test lead. Insert it fully.
2. Move the shutter to reveal the + and -
terminals.
2.4 Connecting Test Lead
• To avoid electric shock, be sure to dis-
connect the test leads from the object
under test and turn off power, before
connecting or disconnecting the test
leads to/from the tester.
• To avoid electric shock, never use the
tester if the shutter is broken.
Test leads cannot be connected to the
tester if the AC adapter, a temperature
sensor, or USB Cable is connected.
To Next Page
Loading...
