Hioki 3455 - TEST Leads and 9751-01, -02, -03 ALLIGATOR Clips Specifications

7.3 9750-01, -02,- 03, -11, -12, -13 TEST LEADs and 9751-
01, -02, -03 ALLIGATOR CLIPs Specifications
150
9750-01, -02, -03, -11, -12, -13 TEST LEADs and 9751-
01, -02, -03 ALLIGATOR CLIPs are exclusively for use with
3455 and 3455-20.
7.3 9750-01, -02,- 03, -11, -12, -13
TEST LEADs and 9751-01,
-02, -03 ALLIGATOR CLIPs
Specifications
Operating
temperature
and humidity
0 to 40°C, less than 90%RH (non-con-
densation)
Operating
environment
Indoors, Pollution degree 2,
Up to 2000 m (6562ft) ASL
Storage
temperature
and humidity
-10 to 50°C, less than 90%RH (non-con-
densation)
Maximum rated
voltage to earth
5000 VDC/2 mA
(insulation resistance measurement)
1000 VAC
Measurement category III
600 VAC
Measurement category IV
Anticipated transient overvoltage 8000 V
Rated voltage
1000 VAC, 5000 VDC
Rated current
10 A
Dielectric
strength
6880 VAC 50/60 Hz
Between core conductor and sheath
(9750 TEST LEAD)
Between metal and resin
(9751 ALLIGATOR CLIP)
15 seconds, Sensitive current 1 mA
Applicable
Standards
Safety
EN61010
Applicable
models
Model 3455
HIGH VOLTAGE INSULATION HiTESTER
Model 3455-20
HIGH VOLTAGE INSULATION HiTESTER