Hioki 3455 - Turning Power on and off

2.2 Turning Power On and Off
44
Press and hold the key for
around one second.
After all the screen indications light, the
version and the position of the battery
selector switch appear and then the
tester enters the standby state.
The tester recalls the settings that were
present before power was last turned off.
Press the key.
The screen is switched off and power is
turned off.
2.2 Turning Power On and Off
Turning power On
Indicates the position of the battery selector switch.
bP: Using the Model 9459 BATTERY PACK
Lr6: Using the LR6 alkaline batteries
Version
When the battery status indicator
is low, replace the battery.
 See 2.1.1 "Installing or Replacing the Battery"
(page 31).
If the batteries or the battery pack is running
low, [
LObAt] is indicated. The tester turns
off if use is continued.
Turing power off