Hioki 3455 - Page 108

102
• The table below shows storable data.
Recording
method
Type of data
Data stored in one record:
record 1
Manual
recording
Standard mea-
surement data
(Data when
neither [TC] nor
[STEP] is on)
Data No., year/month/day/
hour/minute/second (at the
end of resistance measure-
ment), elapsed time,
test voltage (setting),
actual output voltage, resis-
tance (last) / (after 15 sec.) /
(after 30 sec.) / (after 1 min.),
PI, DAR, user-set interval for
PI x 2, and, resistance at
user-set interval x 2
Temperature cor-
rection data
(Data when [TC]
is on)
Data No., year/month/day/
hour/minute/second (at the
end of resistance measure-
ment), elapsed time,
temperature, humidity,
test voltage (setting),
actual output voltage, resis-
tance (last),
Reference temperature,
Resistance after correction , and,
table No.
Step voltage test
data
(Data when
[STEP] is on)
Data No., year/month/day/
hour/minute/second (at the
end of test),
Step time, temperature,
humidity
,
test voltage (setting) ,
actual output voltage x 5,
Resistance
x 5
Logging
recording
- - - - - -
year/month/day/hour/minute/
second (at the start of logging
recording), Measuring interval,
temperature, humidity
,
test voltage (setting) ,
actual output voltage x 360
times,
Resistance x 360 times
• In step voltage test resistance measurements,
only the last measurement at the end of each
step is recorded.
• Voltage measurement data cannot be recorded.
• Temperatures are not stored as logging records.