4.4 Step Voltage Test
98
2. To display other detailed data, use the
following keys.
Test voltage (setting) and actual output
voltage are toggled automatically.
3. If the key is pressed on the
detailed data screen, the indica-
tor changes from blinking to continu-
ously lit and the LCD returns to the
standby screen.
Indications to be switched Keys used
Voltages and data at 5 steps
key
Insulation resistance leakage current
key
(Temperature and humidity are measured imme-
diately before or after the test.)
key
Elapsed time to the
step currently displayed
Temperature/
Humidity
To Next Page
Loading...
