5.1 Recording Measurement Data
1
2
3
4
5
6
7
8
9
10
11
付録
索引
107
w
• Continuous recording time is determined
by the battery charge level
• If the battery charge level becomes low
during measurement, [
LobAt] appears
and the tester records the measurement
data to that point.
• When a low resistance is measured, more
power is consumed, thus the tester may
not be able to measure data equal to the
maximum number of loggings.
• We recommend the 9459 BATTERY
PACK (optional) when performing logging
recording, since this pack has a larger
capacity.
To Next Page
Loading...
