5.1 Recording Measurement Data
110
2. Press the key to display a data
No., choosing from [Lr0 - Lr9].
When temperature and/or humidity are
already held, if the key is
pressed, the data number of another
group appears.
Example:. . . n0 P0 Lr0 A0 b0 . . .
3. Press the key.
Data No. [Lr] changes to continuously lit,
and time blinks.
If is indicated for a data No., data is
already recorded under that number. In
logging recording, data cannot be
overwritten.
Delete the existing data first and then
record new data.
To Next Page
Loading...
