Hioki 3455 - Page 124

5.2 Checking Recorded Data
118
Representative Data Screen
When step voltage test data is displayed,
the representative data screen appears
first, showing data of the last step.
Press the keys shown in the table below to
switch the indication.
Detailed Data Screen
Press the key on the representative
data screen, after which will blink
and reveal the detailed data screen. The LCD
shows the data from the first step.
Press the keys shown in the table below to
switch the indication.
Indications to be switched Keys used
Elapsed time  Temperature/Humidity
key
Date of measurement  Measurement time  Data
key
Go to the detailed data screen.
key
Return to the standby screen.
key
Test voltage setting  Actual output voltage
(Ex. 5.00 kVSET  5.25 kV)
Automatic
switching
Indications to be switched Keys used
Switch to data of another step.
key
Insulation resistance  Leakage current
key
Elapsed time to each step Temperature/humidity
key
Date of measurement  Measurement time  Data
key